Hi,
Thank you for these very nice designs.
I am trying to reproduct one Ninja 2021. When checking the BOM files, I found that the version of the control unit is "BOM ControlUnit02_01", but the pcb file is ControlUnit02_02.
Another issue is that in the Ninja 2021 web page, the Detector's BOM link provides U01_EmitterOnly_v01_BOM.
So is it possible to update the above two BOM files?
Looking forward to your feedback. Thanks in advance.
I've asked Bernhard and Joe if they can update this and let us know here.
Hi,
I have fixed the detector BOM file link so that should now be available on the page. For the Control Unit BOM I have checked the schematic file and this BOM is correct with a few exceptions which I will be confirming the changes in the BOM with Bernhard fix and update the file on the site. The changes I have found are as follows: R1101 is now R803, R1104 is now R804, and R1306 has been changed to ERA-2AEB1820X.
Best,
Joe
Hi,
the BOM for ControlUnit02_01 will also work for ControlUnit02_02.
The difference between 02_01 and 02_02 are only some signal names and a page title in the schematic. This was done for clarity. The circuits and PCB layout are the same, so the same parts will work.
Please let us know if you have any other feedback.
Best,
-- Bernhard
Just to clarify, the changes Joe found above are correct. R1306 was changed to slightly lower the system voltage from 5.3V to 5.0V.
We'll post corrected files in the next few days to remove these 3 discrepancies.
English